Connect Fixed Readers to MQTT Broker

This section serves to guide the user to connect Zebra fixed readers FX9600, FX7500 and ATR7000 with MQTT Broker with MQTT version 3.1.1.

Important

prerequisite:

• FX9600 and FX7500 readers firmware version should be >= 3.10.X

• ATR7000 reader firmware version should be >= 3.17.X

Warning

Reader uses 8883 port to connect with EMQX MQTT Broker. Port should be open for this tutorial to work.

Other pages in this section provide guidance for:

• MQTT Broker Setup
  • Installing MQTT broker on windows
  • Testing the broker installation
  • Network Considerations
• Device Setup
  • Web Interface
    • Import Certificates
      • Using SCP
      • Using Web UI
    • Add MQTT Endpoint
    • Interface Configuration
    • Start ZIoTC Service
  • Reader Manager
    • Import Certificates and Generate Endpoint Configuration
    • Import Configuration into Reader
    • Connect to Cloud
    • Verify Cloud Connection
• Testing
  • Install MQTT Client
  • Configure MQTT Client
  • Interact with Reader
• Troubleshooting